Notifications
Clear all
Topic starter
Need some help. I have a lab test that we used to send out to a reference lab. The LOI code for it was LOI-2877-9 Prealbumin,serum,quantitative. We are now bringing this test in-house because we have new equipment that can run the test and the LOI code that was given to our Lab manager is LOI-14338-8. I can't find this in the FOT file so I tried putting in the xref file I,LOI-14338-8,LOI-2877-9 but that didn't seem to work, the result did not go into the flowsheet.
In case it matters, we are on CPS 12.0.11
Suggestions?
Thanks,
Linda
Posted : April 22, 2016 11:05 am
Hi Linda, you can email me if you need help. When you make changes to those files, please remember you need to restart the DTS for those changes to take effect.
Posted : April 22, 2016 11:14 am
Topic starter
Thanks Arnold. I didn't restart the DTS. Will give that a shot and will let you know if that doesn't work.
Thanks!
Posted : April 22, 2016 11:53 am
If you made the change directly from the LinkLogic config folder vs. via Centricity I would suggest going to Administration > LinkLogic Task Options > Lab Result folder > Highlight lab > Highlight Cross-Reference file > Click Change > Click ... and select the updated file. If that does not correct then pull the HL7 file and confirm that LOI-14338-8 is indeed in Segment OBX-5.1
Posted : April 25, 2016 9:21 am
